For
$150 you can have both a tip-up and a slider canopy. nnnnnn sells a
modification to the slider canopy that is a clever and easy modification.
All of the parts are included in the kit and it is a 1-day job.
First, you remove all of the tubing on the forward bow beneath the fore-aft
side tubing. You replace the roller mechanisms with a new weldment that is
attached above the side tubing.
At
the rear passenger side, a latch is added that would normally stop the canopy
from sliding all of the way back. As the canopy hits the latch, you simply
pull it out of the way and let it move back the remaining inch. A groove
cut in the slider track lets it lift free of the rear track.
It then rotates on the front rollers and tips forward about 60 degrees.
Click here to email Brian or Ken.
Last updated:
April 03, 2004.
For
$150 you can have both a tip-up and a slider canopy. nnnnnn sells a
modification to the slider canopy that is a clever and easy modification.
All of the parts are included in the kit and it is a 1-day job.
At
the rear passenger side, a latch is added that would normally stop the canopy
from sliding all of the way back. As the canopy hits the latch, you simply
pull it out of the way and let it move back the remaining inch. A groove
cut in the slider track lets it lift free of the rear track.